For a given humidity, as the temperature reduces, the moisture compression will be ____:

The aftercooler operation consumes approximately ______ of the total air compression package power:

Reciprocating compressors are best suited for high volume, lowpressure applications:

Water-cooled units are more energy efficient compared to air cooled compression system:

The moisture holding capacity of air reduces by _______ for every 20°F drop in compressed air temperature:

In order to prevent corrosion in air compression system, air’s relative humidity (RH) should be _____ or lower:

The moisture in compressed air can be in which of the following:

______ temperature and _______ humidity will result in better compressor performance:

As the air is denser and dryer, the compressor capacity will _______ :

Which of the following compression system cannot be started and loaded immediately:

Particulate Removal After Filters in air compression system removes physical debris such as rust, scale and dust from the system of size _________ and smaller:

Which of the filters eliminate microorganisms from compressed air and are used in processes which require the highest air quality:

Multiple compressing staging is usually adopted when the discharge pressure is greater than _____ :

Which of the following compressor is better suited for heavy demand applications requiring, steady state operation and negligible process fluctuations:

In air compression system, the inlet and outlet of the receiver should be oriented at  ______ degree angle to help prevent moisture carryover:

Larger pipe radius of compressor piping system, ______ will be the pressure drop:

Energy available to do useful work is less than ______  of the compressor input energy.

For an efficient two-stage, water-cooled reciprocating compressor The bhp per 100 cfm can range from about _______ :

A very efficient compressed air piping system design is ____ design

Which of the following units are used to determined the volume of air that is  compressed at the site of the compressor: