Low-pressure boilers operate at pressures less than or equal to ______ for steam:

Mechanical ventilation shall be provided at a rate of not less than _____ cfm per square foot of floor area over the storage area:

Cleanouts serving horizontal sections of grease ducts shall be located not more than _____ from changes in direction that are greater than 45 degrees:

The automatic system shall be capable of producing a ventilation airflow rate of _____ per square foot of enclosed parking garage floor area:

The fire damper rating (in hours) for penetration less than 3 hour fire resistance rated assemblies shall be ________ :

For duct wrap, the installed thickness of duct insulation  used to determine R-value (Thermal Resistance) shall be assumed to be ______ of nominal thickness:

The cross-sectional area of a flue serving a solid-fuel-burning appliance shall be not greater than ______ times the cross-sectional area of the appliance flue collar or flue outlet:

The vent vertical termination for mechanical draft system shall be located at least horizontally _____ from any portion of the roof structure: